Spišská Nová Ves /Wiring · Inspections · Repairs
Electrical work for homes and businesses.
Inspection report included.
We wire new builds, rewire old flats and track down the cause of faults. Inspections are done by our own inspection engineers, so you are not waiting for an outside contractor to free up.
- Area
- Spišská Nová Ves and around
- Company
- Bodzi-elektro s. r. o.
- Company ID
- 57 328 790
01 / What we do
What we do
Four areas of work. Most jobs combine them — we run the wiring, carry out the inspection and make good the walls behind us.
01
Electrical installations
Wiring a house under construction, or replacing old aluminium cabling in a flat. From the supply through the board to the last socket.
- Wiring for new houses and flats
- Rewiring older flats and houses
- Consumer units and distribution boards, breakers, RCDs
- Socket and lighting circuits, switches, fitting luminaires
- Service connections and metering boards
- Wiring for offices and commercial premises
02
Inspection of electrical equipment
Inspection and testing of electrical installations under Slovak regulations. The result is an inspection report (revízna správa), which you need for building approval, for connecting a supply point and for your insurer.
- Initial inspection of a new or rewired installation
- Periodic inspection during use
- Inspection after any work on the installation
- Measuring insulation resistance and earth fault loop impedance
- Testing RCDs and continuity of the protective conductor
- Inspection report on paper and as a PDF
03
Repairs and faults
A breaker that keeps tripping, a circuit that stays dead, an RCD that goes after rain. We find the cause and fix it, rather than swapping a part and leaving.
- Finding why a breaker or RCD keeps tripping
- Replacing damaged sockets, switches and luminaires
- Adding a circuit or a socket to an existing installation
- Repair and maintenance of distribution boards
- Clearing defects found during an inspection
04
Preparatory and finishing work
Chasing, wall penetrations and making good after the electrician. You do not have to find another firm and wait for it to free up.
- Chasing walls for cable runs
- Penetrations through walls and ceilings
- Making good after the installation
- Finishing work indoors and outdoors
02 / Inspections
Inspections are done by our own inspection engineers
An inspection is not a formality. It establishes whether the installation will disconnect a fault before it hurts anyone. The output is an inspection report.
Inspection report — what is in it
Bodzi Elektro
- Type
- Initial · Periodic · After alterations
- Subject
- Electrical installation — house, flat, commercial premises, board
- Inspection
- Condition of the board, protective devices, circuit labelling, protection against electric shock
- Measurements
- Protective conductor continuity · Insulation resistance · Loop impedance · RCD testing
- Defects found
- Listed together with what needs doing and in what order
- Conclusion
- A statement on whether the installation is safe to operate
- Output
- Inspection report on paper and as a PDF
- You will use it for
- Building approval · Supply connection · Insurance claim · Official checks
Inspection engineer
Date
When you need an inspection
- AYou have a new or rewired installation and it is going for building approval or a supply connection.
- BThe periodic inspection is due. For an ordinary family house that is usually every five years.
- CYou are buying or letting a property and want to know the condition of the wiring.
- DYour insurer or an inspector is asking for a valid inspection report.
03 / Who we are
Who we are
A young firm that answers the phone
Bodzi-elektro s. r. o. was founded on 22. 11. 2025 and is run by Marko Bodziony. We have been trading for a short time and we are not going to pretend otherwise.
What people actually worry about with an electrician is different. Whether he picks up the phone, whether he turns up on the agreed day, whether he clears up after himself and whether the paperwork is in order. To us that is the job, not a bonus.
We hand over the full documentation: the inspection report, the board schedule, labelled circuits. In five years, when the next inspection comes round, somebody else will be able to follow it too.
- Managing director
- Marko Bodziony
- Founded
- 22. 11. 2025
- Registered office
- Stolárska 2678/1, 052 01 Spišská Nová Ves
04 / How it works
How it works
- 01
You get in touch
You call or write with what you need. If nobody picks up, we will get back to you as soon as we can.
- 02
Site visit
We come and look at the site. For an inspection we take over whatever documentation you have.
- 03
Quotation
You get a breakdown of labour and materials with a price. Only then do you decide.
- 04
The work
We agree a date and do the job. If anything changes along the way, you hear about it before we do it.
- 05
Handover
We hand over the work, clear up and hand over the documentation. For an inspection, the report.
05 / Projects
Projects
Photos of completed work. Distribution boards, service connections, lighting and EV chargers.
01 Consumer unit ready for the circuits to be connected 02 Inside a service pillar after wiring 03 Control panels with contactors and relays 04 Pendant luminaire above the staircase 05 Twin charging station in a car park 06 Photovoltaic panels in place
06 / Where we work
Where we work
Spišská Nová Ves and the surrounding area
We are based on Stolárska street in Spišská Nová Ves. Most of our work is in the district and in neighbouring towns. If you are further away, call and we will tell you straight whether we can fit it in.
- Spišská Nová Ves
- Smižany
- Spišské Vlachy
- Krompachy
- Markušovce
- Levoča
- Gelnica
- Poprad
07 / Common questions
Common questions
Do you take small jobs, or only full installations?
We take small jobs too. Replacing a socket, fitting a light, adding a single circuit or tracing why a breaker keeps tripping are all part of the work.
How long does rewiring a flat take?
It depends on the size of the flat, the number of circuits and the condition of the existing wiring. We will give you the dates and the number of days after the site visit, once we can see the real state of it. An estimate over the phone would be guesswork.
What will it cost?
The price follows from the scope of the work and the materials. After a site visit, or after you send us the design, you get a quotation that shows what goes into the price.
Do you clear up after yourselves?
Yes. When the work is done we take the waste away and make good the places we have chased. We do not treat that as an extra.
When is an inspection of the installation required?
An initial inspection is carried out on a new or rewired installation before it is put into service. Without the report the supply point will not be connected and the building will not pass its final approval. During use the inspection is then repeated at set intervals.
How often is it repeated for a house, and how often for business premises?
The interval depends on the type of building and on the environment the installation sits in. For an ordinary masonry family house it is usually five years. In higher-risk spaces, such as a damp workspace or a workshop, the interval is shorter. The exact interval follows from the assessment of external influences and we write it into the report.
What should I prepare before the inspection engineer arrives?
Access to the board and to every room, the option to switch off the supply for the time needed, and any documentation you have: the wiring design, the previous inspection report and the assessment of external influences. If you have none of it, that is not a problem, it only takes longer on site.
08 / Get in touch
Tell us what you need
Calling is quickest. If nobody picks up, we are on a roof or inside a board — we will call you back.
If you would rather not call, write. The town, what the job is and when it suits you is enough. A photo of the board or the site helps most.
Contact