Skip to content

What we can do for you

Electrical installations, inspections and repairs of electrical equipment. Below is what falls under each area of work. If your job is not listed, call and we will tell you whether we do it.

01Electrical installations

Electrical installations

Wiring a house that is still being built, or replacing old aluminium cabling in a flat. From the supply, through the board, to the last socket.

  • Wiring for new houses and flats
  • Rewiring older flats and houses
  • Consumer units and distribution boards, breakers, RCDs
  • Socket and lighting circuits, switches, fitting luminaires
  • Service connections and metering boards
  • Wiring for offices and commercial premises
Open distribution board with wired circuit breakers, RCDs and conductors terminated in terminal blocks
01 Wired board, breakers and RCDs on the DIN rail

02Inspection of electrical equipment

Inspection of electrical equipment

Inspection and testing of designated electrical equipment under Slovak rules. The result is an inspection report (revízna správa), which you need for building approval, for connecting a supply point and for your insurance.

  • Initial inspection of a new or rewired installation
  • Periodic inspection during use
  • Inspection after any work on the installation
  • Measuring insulation resistance and earth fault loop impedance
  • Testing RCDs and continuity of the protective conductor
  • Inspection report with the measured values and the conclusion

Inspections and testing in detail

Double-door distribution board with modules on DIN rails and terminal blocks
02 Double-door board with modules on DIN rails

03Repairs and faults

Repairs and faults

A breaker that keeps tripping, a circuit that stays dead, an RCD that goes after rain. We find the cause and put it right, rather than swapping a part and leaving.

  • Finding why a breaker or RCD keeps tripping
  • Replacing damaged sockets, switches and luminaires
  • Adding a circuit or a socket to an existing installation
  • Repair and maintenance of distribution boards
  • Clearing defects found during an inspection
Flush-mounted board enclosure with white doors and an access hatch in a hallway wall
03 Flush-mounted board enclosure

04Preparatory and finishing work

Preparatory and finishing work

Chasing, wall penetrations and making good after the electrician. You do not have to find another firm and wait for it to free up.

  • Chasing walls for cable runs
  • Penetrations through walls and ceilings
  • Making good after the installation
  • Finishing work indoors and outdoors

05Business activities

Business activities

The exact wording from the commercial register extract. That is what we work to.

  1. 01Montáž, rekonštrukcia a údržba vyhradených technických zariadení elektrických
  2. 02Opravy vyhradených technických zariadení elektrických
  3. 03Prípravné práce k realizácii stavby
  4. 04Dokončovacie stavebné práce pri realizácii exteriérov a interiérov

Need a price?

Write and tell us what the job is and which town. We will get back to you and arrange a visit.

CallE-mail